Yururi-style MS Fletching Jig 4-Piece Set

This is a jig for cutting the chassis to create an MS flex.
This is a 4-piece set including jigs for cutting the chassis (vertical/angled), a jig for making cuts, and a jig for cutting the anti-sag plate.

Shipping will be approximately once every two days.

We can also accommodate individual sales to some extent, so please leave a comment.

The following is the product description.

The Mini 4WD chassis and FRP plates shown in the photos are not included.

This jig was created to cut at the positions I want.

Photos of the cut state are included, so please judge from the photos whether it matches the position you want to cut.
The saw used is the Tamiya Craft Tool Thin-Blade Craft Saw.

For those who have never made an MS flex:

The tools and parts used when making an MS flex are as follows:
- MS chassis set (required)
- AR chassis rear wide stay, etc. (for anti-sag plate; can be purchased later)
- Thin-blade craft saw (required)
- Nipper (required)
- Cutter (required)
- Drill 5.5mm or 6.0mm (almost required; 6.0mm may be better for barrel springs)

As for the springs, you will basically use one of the following:
- Tamiya 15330 Dangun Spring Set (Barrel Type) *Recommended if sold at list price.
- AO-1034 Mini 4WD PRO Slide Damper Spring Set + Modifications or Ingenuity

There are multiple ways to process the area around the springs.
Due to the availability of parts, it is best to prioritize obtaining the parts or deciding on the method.

*As is standard, please note the following points.
This product is produced using a 3D printer.
Please only purchase if you understand the characteristic layer lines, production by individual handwork, discoloration during layering, etc.
We cannot guarantee any damages incurred from using this product.

Please see below for other items.
#nonbiry_lab

Search terms below
#Mini4WD
#MS
#ms
#MSflex
#msflex
#mschassis
#jig
#processingjig