★High Concentration! Portable Hydrogen Bottle★Great Price, Free Shipping!!

Large Capacity!
High Concentration!
Low Cost!

This is the latest hydrogen-generating bottle.
No troublesome tasks like replacing cartridges.
Simply add water, press the button, and enjoy freshly made hydrogen water!

- Electrolytic Hydrogen Generator
- Approximately 10,000 uses for the main unit (varies depending on usage and environment)
  *This does not guarantee the number of uses.
- Bottle Capacity: 400ml
- Rechargeable (USB cable included) Up to 20 uses on a single charge (approx. 90 minutes)
- Usable Temperature: 1°C to 60°C
- PPM: 0.8 - 1.1
- ORP: -600mV

★★ Not a low-concentration, inferior ppb product. High concentration!

1. Made of high borosilicate glass (due to boron's small atomic weight, it has lower density than regular glass) and stainless steel. No epoxy resin (BPA) is used.
2. Enjoy a healthy lifestyle with this portable hydrogen water maker.
3. You can drink hydrogen water in just 6 minutes.
4. Stylish design, making it a perfect gift.
5. Usable at home, work, or while traveling.

Instructions
1. Before first use, please wash with 80-95°C hot water. After washing, securely tighten the cap and main unit and check for leaks. Open the cap again and fill with water below 60°C.
2. Connect the main unit to the USB cable and charge fully (approx. 4 hours). The light will glow blue when charging starts and turn red during charging. The light will turn off when fully charged.
3. The power button is located at the bottom of the main unit. Pressing the button starts electrolysis.
4. A light press of the power button will make a sound and glow blue. After 4-6 minutes, when hydrogen water is ready, it will make a sound again and automatically shut off. Press and hold to turn off the power and end operation.
5. Discard the first batch of hydrogen water.
6. If white crystalline particles appear after several uses, soak in warm white vinegar or citric acid (around 40°C) for about 10 minutes.

Notes
1. Do not directly electrolyze high-concentration salt water.
2. We recommend using warm tap water or mineral water.
3. Close the USB connection port when cleaning. Do not use abrasive cleaners.
4. Please use a 5V, 1A charging power supply.