HP Laminator LB0305 / 6-Roller

This is an HP laminator.
It has been used a few times.
It worked without any issues.
As it has been used, there may be numerous scratches and dirt.
I found it difficult to use, so I am looking for someone who can use it.
I purchased it on Amazon for 29,700 yen.
It will be shipped in the original cardboard box it came in.
The following is quoted from Amazon:

A commercial 6-roller machine from the simple and easy-to-use HP laminator series. Warm-up is completed in approximately 75 seconds*. Once the temperature setting button is pressed and lit, it is ready to use. Supports both HOT and COLD lamination. With 5-step temperature setting buttons, you can easily process films from 75 microns to 175 microns. *75 micron
Processing speed per A4 sheet is approximately 30 seconds. The first sheet is ready to process in a total of 105 seconds from switching on! *75 micron If the film jams, the internal rollers will automatically reverse to remove the film. You can also manually reverse the internal rollers by pressing the reverse button. Please use this function when the film jams. Once you press the button for the film thickness you are using and the ready lamp lights up, it is ready! Supports cold, 75 micron, 100 micron, 150 micron, and 175 micron films! Supports a maximum processing width of 330mm! It can process a wide range of film sizes, from small items like photos and medical cards to larger items like menus. Laminating prevents fading and damage, and is also water-resistant, protecting flyers and photos from damage and preserving their beauty.
1. Press the temperature setting button, select the film type, and wait for it to light up. 2. Sandwich the document in the film. 3. Insert it into the slot to complete. [Precautions for use] To prevent film jams, please observe the following. Do not cut the film and insert it. Do not leave margins on the film. Do not insert the film from the open side. Do not insert the film at an angle.
[Product Details] Size: Approx. W51cm x D17.5cm x H12cm / Warm-up time: Approx. 75 seconds *75μm / Power consumption: 700W / Compatible processing size: Card to A3 size (75-175 micron thickness) / Number of rollers: 6 / Processing time (A4/1 sheet): Approx. 30 seconds *75μm