For To-chan-sama: Sewing Allowance Guide for OLFA Rotary Cutter (2 pieces)

Seam Allowance Guide for OLFA Rotary Cutter
Set of 2

Allows you to cut with a uniform seam allowance along your pattern.
OLFA previously sold an official product, but it appears to be discontinued.

◆ Can be directly attached to OLFA rotary cutters with mounting holes.
Rotary Cutter LL Type (Model 136B) 60mm / Current
Rotary Cutter L Type (Model 41B) 45mm / Discontinued
Rotary Cutter S Type (Model 36B) 28mm / Discontinued
Perforating Cutter 2B (Model 194B) / Discontinued

◆ For cutters without mounting holes, you will need to drill a φ4mm hole 80mm from the blade tip.
Also, if the mounting surface is not flat, you may need to make adjustments to ensure it is perpendicular.
The maximum attachable thickness is approximately 12mm, but if it is thicker, you can attach it by preparing M4 bolts, washers, etc. suitable for the thickness.
(Example of attachment to a 100-yen shop rotary cutter in the 3rd image)

Material: Plastic (PETG) (POM), Steel, etc.
Size: Approx. 110 x 100 x 15 mm
Weight: Approx. 50g
Color: White (Color may vary slightly from the product image depending on material availability)

* The shaft part does not have markings, so you will need to adjust the width with a ruler or similar tool.
* The rotary cutter itself is not included in this listing. Only the guide set (as shown in the 2nd product image) is for sale.
* The product image shows a total of 2 handle knobs (1 spare) on both ends of the shaft, but the actual listing includes only 1 handle knob (no spare).
* This is a handmade item produced with a home 3D printer, so there may be scratches, dirt, or warping. Additionally, layer lines from the molding process are noticeable throughout.
* The shape of the handle screw may vary depending on procurement status.