(New) ASUS Bezel-Free Kit 31.5-inch Extension Spacer [Curved Monitor]

This is an extension kit for screen sizes not compatible with the Bezel-Free Kit (curved screens are also compatible). (Assumed for 31.5-inch screens)
This is a 3D printed product.

[Changes]
The thickness of the part that inserts into the kit has been increased to the maximum possible (improved rigidity against deformation).
The height of the part facing the screen has been further increased.
(Improved adjustment feel for curved or near-flat angles)

The material is TPU (to put it simply, it's the same material as the transparent, soft case for smartphones).
If a hard material were used, white powder might appear due to friction during screen adjustment, potentially causing scratches. However, TPU is soft and gentle on monitors.

The thickness of the spacers that come into contact with the screen has been reversed (front and back).
If the angle of the three screens in a triple monitor setup is too wide, it can be difficult to completely eliminate the bezels. By placing the thicker side of the spacer towards the screen, you can create a slight gap between the Bezel-Free Kit and the screen, which is helpful when the angle makes it difficult to eliminate the bezels.
The thickness on the opposite side is made standard, so please adjust according to your preference by flipping it.

It is possible to eliminate bezels even in a near-flat state, but this may lead to other issues such as the refractive index of the Bezel-Free Kit. Therefore, please consider this as an aid for fine-tuning adjustments in a state closer to the recommended usage angle.